Daily maintenance methods for JiaYou Motor reducers
In order to ensure the motor reducer`s normal operation, except for the monitoring and maintenance during the normal use according to the rules, regular checking should also be done for motor reducer maintenance. In this way can timely eliminate some problems, prevent the fault occupation, and ensure the motor reducer safe and reliable operation. Intervals of periodic maintenance may vary according to use environment of the motor reducer. Regular maintenance methods are as follows:
1.Clean the motor reducer. Timely remove external dust, oil and mud on the basement part of motor reducer. If there is much dust in the using environment, it`s better to clean once a day.
2.Inspect and clean the motor reducer terminals. Check whether wiring screws in the junction box are loose or burned.
3.Check the fixed screws, including anchor screws, end cap screws, bearing cap screws etc. Tighten the loose nut.
Check the driving device, belt wheel or the coupling for cracks and damage, whether installation is firm; the belt and the coupling buckle whether are in good condition.
Bearing inspection and maintenance. After a period of time of using, bearings should be cleaned, replace the grease or oil. The time for cleaning and changing oil is decided on the work environment, cleanliness, the lubricant type of the motor reducer. Generally it should be washed once and re-change the grease every 3-6 months.
